For the convenient and safe handling of beaker containing hot solutions and for pouring out the contents.The jaws are asbestos covered to ensure firm grip.Overall length of tong 30cms.approx, Made of stainless steel.

Made of seasoned hardwood, polished, with single row of holes,.Vertical pegs are provided for quick drying of the test tubes.
A. For Six Test Tubes, with six pegs, two holes of 32mm diameter and four holes of 22mm diameter.
B. For Twelve Test Tubes, with twelve pegs, two holes of 32mm diameter and ten holes of 22mm diameter.

Six's pattern, double scale. Range -20 deg. To 120 deg. F x 2 deg. F. spirit or mercury filled. Mounted on wooden polished base with magent.

Mounted on acrylic sheet, with screen printed markings and figuers. Range -20^o to +50^o x 1^oC and 0^o to 120^oF x 2^oF red spirit filled. Overall dimentions 500 x 40 mm.

Mounted on polished wooden base, with screen printed markings and figuers. Range -20^o to +50^o x 1^oC and 0^o to 120^oF x 2^oF red spirit filled. Overall dimentions 500 x 40 mm.

Mercury in glass, with white enamelled back, 5/7mm diameter with reinforced bulbs. Packed in cardboard case.

Triangular top of cast iron, with steel legs bent outwards for stability, painted.

Pressure die cast aluminium alloy, other parts are of plated brass, cork lined, ensures firm grip at all angles of opening, opens upto 90 mm, with 250 x 8 mm nickel plated mild steel rod.

Cylindrical, made from thick aluminium sheet, with two handles and a set of concentric rings.
Dia: 125   150   200   mm

With built-in Electric heating circular water bath. Anodised aluminium, 200mm diameter x 125mm deep, with integral constant level device, set of aluminium rings, plastic feet and 1KW heater with overheat protection device. With connector and 3-core cable. For 220-240V AC supplies.

Hemispherical, made from thick copper sheet, with two handles and a set of concentric rings.     

Dia:	100   125   150   200   mm

 

Made of brass, chrome finish, inlet tail is threaded 1/2 inch BSP outlet tube is made out of 15mm brass tubing which is coupled to the tap standard by means of a sleeve not allowing the neck to swivel or be locked in a desired position. Leakproof operation, bench mounting.
Single Way, Two Way, Three Way

Chrome plated brass weights, in polished velvet lined wooden case, with hinged lid. Divided compartments with dust proof cover holds nickel-silver and aluminium fractions. With chrome plated brass forceps. Accuracy plus-minus 5mg.

Capacity:	1 mg. to 100 grams   1 mg. to 200 grams

Polished brass, in hardwood case with hinged lid. Divided compartment with dust cover holds nickel-silver and aluminium fractions. With chrome plated brass forceps.
Capacity:   1 mg. to 100 grams   1 mg. to 200 grams   1 mg. to 500 grams   1 mg. to 1000 grams   1 mg. to 2000 grams

Polished brass, supplied with wooden block, as illustrated.
Capacity: 500grams   1000grams   2000grams

Physical 1 mg to 500 mg. made of special alloy, complete set in plastic round case.

Brass, plated, 20g hanger with nine slotted masses, each of 20g, total 200g.

For sonometers, iron casted, finished in synthetic hammer, set of 5 including hanger, each 500 gms. Total 2.5 Kg.

Capacity:	1 mg. to 100 grams   1 mg. to 200 grams

Conical graduated/plain, made of neutral glass. Capacity 15ml.

Available in Diffrent sizes.

A copper nickel alloy of low temperature coefficient suitable for resistance coils etc.

For simultaneous heating and stirring of solutions. A cast aluminium hot plate is mounted above a variable speed magnetic stirrer. An energy regulator for the hot plate, on/off switch and rotary speed control for the stirrer motor together with neon lamps are mounted on the front panel. Supplied complete with teflon coated stirrer bar. For use on 220-240 V, 50 Hz.

Accurate, reliable, rugged and stable pH meter for laboratory and field.

Nickel plated, made of iron, good quality for schools.

Pinch cock, nickel plated iron, flat jaws for compressing flexible tubing.

With interchangeable ground glass/plastic stopper and screw type, Rotaflow stopcock, made of borosilicated glass.

Capacity ml.:	50   100   250   500   1000

For use in experiments involving the measurement of cell EMF under condistions of forward, zero, and reverse current flow. The bridge comprises an inverted 'U' tube with its ends closed by sintered discs. This apparatus provides a more effective method of making reversible cells than the wet filter paper or agar gel methods. Arm diameter 13 mm, width 8 cms. and overall height 10cms.

Short triangular beam, with rider scale. The beam supports are extended and relieve the agate knife edges when at rest. Pillar is highly finished and removable pans are suspended by stirrups from double hooks. The balance is mounted in a polished wooden case, fully glazed. Complete with rider slide, levelling screws. Capacity 200 gm, sensitivity 0.1 mg.

It has equal arms, durable handy and precision instrument commonly used by factories and laboratories for general weightment. Body made of cast iron and pans are die pressed from brass or stainless steel.

Weights are made of stainless steel corrosion resisting quality, arranged in velvet lined case of seasoned wood nicely polished with forceps and two riders 10 mgm. each.