Electrically operated with Speed Regulator

a) with 4x15 ml swing out head. (3500 r.p.m.)

b) with 6x15 ml swing out head. (3500 r.p.m.)   

c) with 8x15 ml swing out head. (3500 r.p.m.)   

Used for storing cadaverous under low temperature cooling condition in order to prevent decomposition. Most useful for Hospitals, Airports, Railways etc. These units are double walled with inner made of stainless steel and outer also made of  thick S.S. sheet. The between inner and outer chamber is filled with high grade glass wool to avoid thermal loss. The front face lifting hinged door is lined with magnetic gasket and is fitted with lock and key. Trays to carry dead bodies provided with handles so as the carry dead bodies. Trays travel on rollers fitted with ball bearing for easy movement. Hermetically sealed compressor serves refrigeration unit to temperature range of –2 degree c. to 4 degree c. –15 degree c. to 20 degree c. (as ordered) Unit is fitted with digital temperature indicator-cum-controller.

The unit is supplied complete with trays, cord and plug, to work on 220/230 volts A.C. supply.

Available in capacity of following sizes :

A. Single human body

B. Two human bodies

C. Three human bodies

D. Four human bodies

E. Six human bodies

MAXIMUM TEMPERATURE 1200 C
WORKING TEMPERATURE 1100 C
Digital Temperature Controller/Buzzer System/Pyrometer

The outer chamber is made of M.S. sheet duly painted and inner chamber of thick S.S. sheet. The gap between two walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with flourocent tubes of 60 cm, length, on the inner side. The unit has a temperature range from 5 degree c to 60 degree c and is controlled with SOLID STATE DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with and accuracy of +- 0.5 degree c. When the tube lights are ON temperature range is from 1`0 degree c to 50 degree c. Air circulation fan is fitted to maintain temperature uniformity throughout. Cyclic illumination conditions are controlled by an automatic timer (0-24 hrs) fitted to the unit. It is fitted with DIGITAL SPEED METER (RPM COUNTER) for shaking platform having VARIABLE SPEED The shaker has variable speed and a platform containing accessory.

To work on 220/230 volts A.C. supply

a) Temp. range from 5 degree c above ambient to 50 degree c.

b) Temp range from 5 degree c to 50 degree c.

OPTIONAL ACCESSORIES:

a)   Additional non-shaking tray(Made of S.S.)

b)    Built-in-U.V. germicidal tube light

c)     Automatic voltage stabilizer 3.0 KVA .

The bath has top made up of tinned copper/brass and body made up of mild steel duly enamel painted. Temperature is controlled thermostat from ambient to 100 degree c. with an accuracy of +- 0.5 degree c.

Top made of copper or brass is chromium plated alongwith cups (wax pots). To work on 220/230 volts A.C. supply. Supplied with wax pots but without glass tubes.

a)  For 4 cups and 6 glass tubes

b) For 6 cups and 8 glass tubes

c) For 12 cups and 12 glass tubes 

RECTANGULAR DOUBLE WALL
DOUBLE Walled, Outer body made of MILD STEEL duly painted or Stainless steel Inner body (working chamber) Lid and concentric Rings made of Stainless Steel. Fitted with immersion heater to work on 220 Volts A.C.

WIDTH DEPTH HEIGHT
(a) 300MM X 250MM X 100 MM (6 HOLES OF 75MM DIA).
(b) 455MM X 355MM X 100 MM (9 HOLES OF 75MM DIA).
(c) 425MM X 325 MM X 100 MM (12 HOLES OF 75MM DIA)

Heavy duty(Improved Model ) FOR 8 ",12" & 18" TEST SIEVES
The Rotap Sieve shaker is durably constructed and is run by ¼ H.P. Electric MOTOR 220 Volts A.C through reduction gear. Designed to carry upto 6/7 TEST SIEVES of 200 mm Dia (8") with one set lid & pan. It reproduces circular and hammering motion is given at top . it reproduce Circular (revolution approx.: 280 to 320 R.P.M and tapping approx.: 140 R.P.M to 160 R.P.M No foundations are required (with timer /without timer)

VACUUM ROTARY EVAPORATOR WITH QUICK ACTION JACK (BUCHI TYPE)
(New improved model with variable system and D.C. MOTOR but to work on 220 volt A.C.)

Fitted with D.C. MOTOR SHAKER FOR CONTINOUS WORK, SMOOTH MOVEMENT AUTOMATIC MOTION, HORIZONTAL TABLE TOP MODEL FITTED WITH VARIABLE SPEED THROUGH ELECTRONIC REGULATOR R.P.M 50
TO 250 R.P.M APPROX. TO WORK ON 220 Volt A.C

This shaker has many research and analysis application. It is specially suited for microbiological tissue culture. The Rotary motions of conical flasks create a fermenting material and prevent formation during evaporation. complete with one top plateform having neoprene rubber discs to hold conical flasks in between the rubber discs.

TOP PLATEFORM SIZE	HOLDING FLASKS CAPACITY
(a)  12" X 12"	9     FLASKS OF 250 ml.
(b)  18" X 18"	16   FLASKS OF 100 TO 250 ml.
(a)  24" X 24"	36   FLASKS OF 50 ml.
(b)  24" X 24"	25   FLASKS OF 250 ml.
(c)  24" X 24"	16   FLASKS OF 500 ml.
(d)  24" X 24"	9     FLASKS OF 1000ml.
(e)  36" X 36"	49   FLASKS OF 100 ml.
(f)   36" X 36"	36   FLASKS OF 250 ml.
(g)  36" X 36"	36   FLASKS OF 500 ml.
(h)  36" X 36"	16   FLASKS OF 1000 ml.
(i)   48" X 48"	100 FLASKS OF 100 ml.
(j)   48" X 48"	81   FLASKS OF 250 ml.
(k)  48" X 48"	64   FLASKS OF 500 ml.
(l)   48" X 48"	49   FLASKS OF 1000 ml.
(m) 48" X 48"	16   FLASKS OF 1000 ml.

(a) LOTUS TYPE CLAMPS FLEXIBLE DULY NICKLE WITH
FLEXIBLE SPRING INSTEAD OF RUBBER DISC.

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperatures and humidity. Atmospheric conditions are created with the chamber to perform different experiments without going onto the field. The walled unit has inner chamber made up of anodized aluminum or stainless steel and outer outer chamber of M.S sheet duly painted. Full view inner glass door permits inspection of specimens. Both compartments are provided with independent controls. Each chamber can accommodates 14 perforated trays of size 430*480m.m. each. Humidity (NOT ADJUSTABLE) IS created in a S.S. water reservoir filled at bottom in both chambers to create 90% to 95% -+ 3% RH humidity.

INSIDE CHAMBER SIZE (WXHXD)

(a)One chamber can control temperature from ambient to 50%c -+ 1 degree c. and the other chamber is fitted with ISI marked SHRIRAM compressor so as to maintain temperature from 5 degree to 50 degree c. -+1 degree c.

(b)-do- same as above but fitted with heating and cooling system in both chambers, so as to control  temperature from 5 degree c. to 50 degree c. -+ 1 degree in both chambers.

OPTIONAL ACCESSORIES

(a)Interior illumination with 3 nos. fluorescent tubes (for each chamber)

(b)Exterior  illumination with 3 nos. fluorescent tubes (for each chamber)

(c)Automatic 0-24 hour timer to regulate cyclic illumination conditions(for each chamber)

(d)Humidity control arrangement from 55% to 95% -+3% RH, controlled by humidistat.

(e)Electronic digital temperature indicator-cum-controller (for each chamber)

(f)Dual setting digital temperature controller for setting two different temperatures for day night

(g)Automatic voltage stabilizer 3 KVA (for each chamber)

SEROLOGICAL WATER BATH
Thermostatically controlled (Automatic Temperature control)
DOUBLE Walled, Outer body made of MILD STEEL duly painted or stainless steel . Inner body (working chamber) Lid Stainless Steel. Fitted with immersion heater to work on 220 Volts A.C with 3-core wire and plug. Digital Temperature Indicator cum controller in place of Thermostat and stirrer can be fitted with the bath.
WIDTH DEPTH HEIGHT
(a) 300MM X 250MM X 175 MM (for 2 racks)
(b) 330 MM X 250MM X 175 MM (for 4 racks)
(c) 455MM X 300 MM X 175 MM (for 6 racks)
(d) 605MM X 300 MM X 175 MM (for 8 racks)

6 Liter capacities with chain compensate counter balance to float through pulley, calibrated to donate volume, inlet & outlet tubes. Stainless steel chamber, complete with corrugated rubber tube and mouth piece.

(FOR 8" & 12" TEST SIEVES)
(Soundless , Vibration type)
Fitted with F.H.P Electric Motor. It can accommodate 6 Test sieves of 8" Dai with Lid and pan. Speed can be regulated through variable speed regulator to work on 220 volts A.C (without Test Sieves) speed regulator to work on 220 volts A.C

Single Drum / Double Drum
Used for tablets to determine the determine the durability at the time of production. A transparent plastic Perspex drum 300 mm Dia x 35 mm deep with cover approx.: also a shaped radial fixed blades which the tablets along with it up to the central height and lets them off while drum is rotation, thus the tablet rub against each other without any hard impact. The drum rotates at a fix speed of 30 R.P.M by geared motor. Electric timer in between 1 to 5 R. P.M/ Digital revolution counter(preset counter) The motor unit is covered in steel cabinet controls the rotation period and shaft extended on one side which the plastic drum rotate. Tablets are weighed before and after the test and the difference is weight for a particular time perior indication the rate of abrasion.

Upright, organ tubes, frontal lever from capillary tubing ¾ it capacity. Thermostatically controlled. The illustrated has bath has been designed mainly for students experiments with smooth muscle etc. it is however quite suitable for general use. The water container of the bath consists of a bottomless screw cap jar of app. ¾ liters capacity fitted into a threaded metal stand in which is also located a wire wound heater to maintain the water temperature. A glass inner vessel passes through the stand and is insulated so that the fluid can be quickly run out. Depending in the vessel is a platinum-tipped oxygen tube which is firmly held by means of screw clamp fixed to one of the stand uprights. Overall height of bath 15 cm.

1) TISSUE FLOATATION BATH AB-52
STAINLESS STEEL. Outer body ,Lid and concentric Rings Stainless steel : fitted with Immersion heater with wire and plug:

SIZE (DIA) X HEIGHT
a) 200 MM x 150 MM
b) 250 MM X 200 MM

2) RECTANGULAR SINGLE WALL AB-53
STAINLESS STEEL Complete body ,Lid and concentric Rings Stainless steel : fitted with Immersion heater with wire and plug:
WIDTH DEPTH HEIGHT
(a) 300MM X 250MM X 100 MM (6 HOLES OF 75MM DIA).
(b) 455MM X 355MM X 100 MM (9 HOLES OF 75MM DIA).
(c) 425MM X 325 MM X 100 MM (12 HOLES OF 75MM DIA).

This double walled unit is most suited for preparing wrinkle free tissue specimens. Inside is made up of aluminum and outside of M.S. sheet duly painted. Temperature range from ambient to 80 degree c +- 1 degree c is controlled by hydraulic type thermostat. Complete with indicators, cord and plug, to work on 220/230 volts A.C. supply.

Dia   x  Depth :

• 200 mm x   75 mm
• 250 mm x   125 mm  

Double walled, Oute Body made of Mild steel duly enamel painted and working chamber made of Cylindrical shaper Heavy gauge of Stainless Steel. A glass Window made of Toughened glass for viewing without opening the Door. Temperature is controlled by sensitive thermostat / digital temperature controller cum indicator from room temperature 50 C TO 150 C . Front pannel fitted with Vacuum Gauge, Vacuum Valves Indicator Lamp 220 Volts A.C supplied with removable shelve.

( INSIDE CHAMBER ROUND SHAPE)

DIA x DEPTH
(a) 200 mm x 200 mm
(b) 250 mm x 250 mm
(c) 250 mm x 300 mm
(d) 300 mm x 300 mm
(e) 300 mm x 300 mm

The Rotary oil Sealed pumps are quite operating and vibration less manufactured on advance technology duly tested 220 VOLTS A.C to assure satisfactory performance motor and drives pump is completely on Rectangular Heavy steel base plate are furnished. V. Belt is covered with Steel cover for safety measures and connected with pump and motor pulley. Vacuum pump are supplied with Vacuum Oil ( without Vacuum Gauge, Moisture trap. MCLOAD gauge , and non return valve etc.) Vacuum pumps are available from 25 litre cap to 200 litre cap. with :-

(a) Vacuum Gauge with Regulator dial type
(b) Moisture trap fitted with Vacuum Gauge and Regulator
(c) Mclaod Guage with Mercury
(d) Non Return Valve with dial guage and regulator
(e) Non Return Valve

Fixed speed approx: 30 R.P.M with BELT SYSTEM. Fitted with H.P. electric motor to work on 220 volts. A.C. (without bottles )

(a) To accommodate 6 BOTTLES in two rows
(b)To accommodate 12 BOTTLES in two rows

Double Wall. Chamber size (working chamber) made of Stainless steel. Outer Body made of Mild steel. Heating arrangement is achieved through Immersion heater. Thermostatically controlled or Digital temperature controller Bath has an oscillating through geared variable speed and shaking approx 40 to 140 cycle per minute. Temperature range from ambient to 100 c Complete with one Stainless steel Tray to hold conical flask 25ml, 50m,100ml., 250 ml 1000ml

WORKING CHAMBER SIZE
(a)275MM X 275MM X 150MM
(b) 405MM X 300MM X 150MM

The shaking machine fitted with D.C. MOTOR to work on 220 VOLT A/C 50 CYCLES to work for longer period smoothly. Flasks mounted spindle to oscillate through a small amplitude sturdy eccentric mechanism provides effective mechanical shaking . The shaking machine constructed to hold 100 ml to 1000 ml. Conical flasks. The shaking speed action is controlled by ELECTRONIC regulator . 100 R.P.M TO 800 R.P.M approx

HOLDING CAPACITY
(a) To hold 4 flasks Cap. 100 ml. to 1000 ml. by side clamps
(b) To hold 8 flasks Cap. 100 ml. to 1000 ml. by side clamps

Designed fro quick and accurate measuring system by using few drops of liquid. This instruments quite suitable for education and training institute, industries. Suitable for testing and control of quality of oils, sugar, paraffin’s, waxes, animal and plant fats, glicrin, alcohol etc.

Measuring range refractive index nD 1.300 to nD1.700.

Sugar percentage scale 0 to 95 % Brix.

Attachable thermometer 0-50 degree standard glass plate having reflective index 1.509 and contact solution for standardization.

Aluminum alloy casted body rigid in construction.

Plywood packing case, instruction manual, dust cover.