Designed fro quick and accurate measuring system by using few drops of liquid. This instruments quite suitable for education and training institute, industries. Suitable for testing and control of quality of oils, sugar, paraffin’s, waxes, animal and plant fats, glicrin, alcohol etc.

Measuring range refractive index nD 1.300 to nD1.700.

Sugar percentage scale 0 to 95 % Brix.

Attachable thermometer 0-50 degree standard glass plate having reflective index 1.509 and contact solution for standardization.

Aluminum alloy casted body rigid in construction.

Plywood packing case, instruction manual, dust cover.

This is a double walled unit mounted horizontally on a sturdy, heavy mild steel tubular stand duly painted . the inner wall is made up of 18 SWG stainless steel sheet duly argon arc welded . outer wall is of thick s.s. plate and is provided with radial locking system which ensures complete risk free and leakproof sterilization . door when in operation or under pressure . pressure is adjustable from 10 to 20 p.s.i. fitted with pressure gauze. Safety valve and steam release valve.

Horizontal autoclaves are available with or without s.s. boiler for units fitted with S.S. boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use re provided hydraulically tested up to 40 P.S.I. . automatic vacuum breaker is provided to break the vacuum in case of vacuum due to steam condensation .

fitted with automatic pressure gauze control switch and automatic low water level cut off device. To work on 220 volt, A.C. supply;

Available in following sizes:
Dia x Depth Load
350 x 550 mm 3 K.W
400 x 600 mm 4 K.W.
550 x 750 mm 7 K.W.

TRIPLE WALLED
The inner chamber , steam jacket, outer chamber and boiler are made of heavy gauze stainless steel with leak proof argon arc welding . the radial locking lid is made of thick S.S. plate. All units are hydraulically tested up to 40 P.S.I. the space between the outer chamber and steam jacket is filled with asbestos sheet or glass wool to minimize the thermal losses.
Steam boiler is fitted with water level indicator , pressure gauze low water level cut off device and automatic pressure control device indfoss piezostat .
Hinged self locking S.S. door cannot be opened when under pressure. The self locking S.S. door automatically disengages the thread mechanism when in operation or is under pressure. Fitted with a dial thermometer to indicate inner temperature and vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation. Two separate valves are provided with for evacuating steam from inner chamber and jacket as and when desired. To work on 440 volts, 3 phase supply .

Available in sizes :
Dia x depth Load
400 x 600 mm 6.0 K.W.
400 x 1100 mm 9.0 K.W.
500x 900 mm. 9.0 K.W.
500 x 1200 mm. 12.0 K.W.

High pressure vertical steam sterilizer is used for sterilizing, surgical instruments dressing materials linen rubber, plastic material by means of saturated stream under pressure of 15 to 20 P.S.I. (adjusted) apart from health services it is also used in scientific research laboratories, educational institutions and universities.

The triple wall unit has inner chamber steam jacket and outer wall made of S.S.  duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss, all sterilizers are hydraulically tested up to 40 P.S.I the lid is made of thick S.S./ gunmetal and closed by wing nut type closing arrangements fitted with a gasket made of neoprene rubber,  water level arrangements to indicate water level, pressure gauze , steam release cock , spring loaded safety valve which can be set at any selected point from 10 P.S.I , +_  3 P.S.I and drain cock..

Supplied complete with cord and plug to work on 220 volt. 50 Hz. AC supply.

Available in following sizes.:

Dia x depth.               Load

a)250 x 450 mm.         1.5 K.W.                                

b)300 x 500 mm.         2.0 K.W.  

c)350 x 550 mm          3.0 K.W.           

d)400 x 600 mm           4.0 K.W.                 

OPTIONAL ACCESSORIES:                                               

a) Automatic Pressure cut-off switch                                 

b) Low water level cut-off device                              

c) Automatic German timer

Electrically heated vertical sterilizer is used for sterilization of surgical instruments dressing materials linen rubber, plastic material by means of saturated stream under pressure of 15 to 20 P.S.I. (adjusted) apart from health services it is also used in scientific research laboratories, educational institutions and universities. Sturdy double walled construction with boiler inner chamber made of stainless steel of 18 SWG sheet. Outer shell is made of mild steel finished with powder-coated paint.

The boiler and outer shell is provided with air insulation. Lid is made of stainless steel plate and is tightened all-around by wings nuts. Molded, joint less gaskets are made of Neoprene rubber. Sterilizer is hydraulically tested up to 40 P.S.I.

Autoclaves are fitted with water level arrangements to indicate water position inside the boiler, pressure gauze, air/steam release cock, spring loaded safety valve which can be set at any selected point from 10 P.S.I, +_ 3 P.S.I and drain cock.Supplied complete with cord and plug to work on 220 volt. 50 Hz. AC. supply.

Available in following sizes.

Dia x depth.                 Load                  

a) 250 x 450 mm.         1.5 K.W.                              

b) 300 x 500 mm.         2.0 K.W.                             

c) 350 x 550 mm                3.0 K.W.                    

d) 400 x 600 mm          4.0 K.W.                                 

OPTIONAL ACCESSORIES:                                              

a) Automatic Pressure cut-off switch                                 

b) Low water level cut-off device                   

With Miller assembly at its heart, the unit is unmatched even by the most skilled hard honing and stropping. It permits to set extract angle of bevel of knife edge. A perfect cutting edge is obtained by sharpening the knife on this unit. Salient features of the unit include easy operation, automatic reversing of knife at regular intervals for an equal bevel angle on both sides of its edge eliminates the need for resurfacing the glass plate as the knife execution is across the full diameter of the rotating plate. The unit comprises of the reinforced sheet metal housing with hinged doors at front and side to facilitate easy cleaning and maintenance. It has a constant speed motor to rotate the ground glass plate 500mm dia x 12mm thick at constant speed. Knife up to the size of 300mm x 13mm can be easily sharpened on the unit. A lubricant reservoir needed for grinding and polishing a supported on top frame. The unit complete in all respects and duly painted.

Supplied  with cord and plug without micro abrasive suitable to work on 220V, single phase 50 Hz.AC. supply.

This the most versatile low temperature indicator for biochemical oxygen demand determination. Caster wheel mounted cabinet is double walled with inner chamber Of anodized aluminum of stainless steel and outer casing of M.S. sheet duly painted. The gap of 75 m.m. between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining temperature uniform ally through the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber is ribbed for placement of shelves at desired height. Full view inner glass door permits inspection of specimens, without disturbing the same, lock and key arrangement Is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5 degree c to 50 degree c is controlled by two EGO/JUMO German double action hydraulic capillary thermostat. Refrigeration unit is formed by Hermetically sealed ISI marked SHRIRAM make compressor and the cooling coils are distributed all round the chamber and lie in the air circulation path. An l-shaped prismatic Thermometer is provided at the top on the front panel along with separate indicator lamps for mains, heating and incoming voltage. Supplied complete with 3 shelves, cord and plug to work on 220/230v A.C. supply.

The cabinets are fabricated out of thick board duly sun mica clad. Interior surfaces Epoxy painted for its longer life. The work table is made of thick board which is sun mica clad at top. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-fitter and HEPA-fitter. Air is drawn through highly effective HEPA fitters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balanced. Motor of ¼ H.P. capacity operates with minimum noise level. The working area is illuminated by fluorescent   lighting fitted to the unit. The height of working table provides a comfortable “SIT DOWN” working position for the operator. In addition to the above features of a standard vertical laminar flow bench, the “MB” bio-state cabinets have arrangement for re-circulating a part of the air thus creating highest level of clean air. The unit is also convertible to the conventional vertical laminar flow bench with downward air flow by lifting the sliding front door upwards. Air is sucked through pre-fitter and the excess air is thrown out from the top by means of a COMPUTER FAN fitted at the top of the unit and is let out through a HEPA fitter of a size 1’x1’x6”.

GLOVE PARTS AND GAUNTLETS are provided on the front door. Unit is fittedwith built in U.V. germicidal light. To work on 220/230 volts A.C. supply.

MODEL                BSC-222        BSC-422          BSC-622

WORKING SIZE       2’X2’X2’          4’X2’X2’             6’X2’X2’

WORKING SIZE       2’X1.5’X6”      4’X1.5’X6”           3’X1.5’X6”

OPTIONAL ACCESSORIES

(a)Satin finish S.S. table top (in lieu for mica top)

(b)Static pressure  manometer.

(c)Exhaust system for 6 feet duct.

(d)Exhaust ducting (per running feet)

(e)Virus burn out unit.

CONSISTING OF:

a)   Removal of capsule.

b)    Filling of powder by dispensing of brush pressing.

c)    Fixing of capsule and sealing.

d)   Injection of capsules.

All contact parts are made of Stainless Steel / Brass

Available capacity 100 capsule.

a) Versatile level operated consisting one plate for putting of  capsule by hand.

Electrically operated with speed Regulator

a)    With 4x15ml Swing out head. (3500 r.p.m.)

b)    With 6x15ml Swing out head. (3500 r.p.m.)

c)     With 8x15ml Swing out head. (3500 r.p.m.)

An ideal instrument for counting bacterial mould colonies in culture work. It provides uniform glare free illumination to minimize strain on eyes and clearly define even small colonies. A 100 mm dia lens covers the entire illumination field and its magnification assures highly accurate results. Counting plate with standard Wolfhugel ruling ensures clearly differentiated and sharply defined colonies. Supplied complete with counting plate, lens, cord and plug. To work on 220VAC supply.

With solid state speed regulator, indication lamp and see through acrylic lid, with head puller but without rotor heads. Maximum speed 4000 r.p.m.

b) –do- with 0-60 minutes “GERMAN” Timer

HEAD AND ACCESSORIES FOR ABOVE:

(a) 8 * 15 ml swingout or angle head

(b) 4 * 50 ml swingout or angle head

Outer wall is made up of M.S. sheet duly painted and inside of S.S. The gap between inner and outer wall is fitted with high grade mineral glass wool. Temp. range from ambient to 70 degree c. is controlled by “JUMO”/ “EGO” GERMAN capillary type thermostat with an accuracy of +- 5 degree c. The unit is provided with manual titling device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. supply.

OPTIONAL ACCESSORIES:

(a) Automatic water cut off device in case water supply is stoped.This is a solid state transistorized device which automatically keeps watch on regular supply of water in the flask and keeps the heaters On only when the water supply is normal. It automatically cuts OFF the supply of heaters from the mains when the water supply get disturbed and thus prevents the burning of heating element/melting of glass coil. Heaters would automatically be switched ON when the water comes to normal.

(b) Special grade rubber tumbling for connections (coil of 10 meters).

The apparatus consists of test cup, lid with handle, removable cup cover with spring operated rotating shutter having pilot jet and flexible shaft. Electrically heated with energy regulator control suitable to operate on 1220 volts A.C. supplied with thermometer.

b) –do- but with VOLTAGE VARRIER                                

c)–do- but SEMI AUTOMATIC MODEL with DIGITAL TEMP. CONTROLLER AND AUTOMATIC DIPPING CYCLE SYSTEM

OPTIONAL ACCESSORIES:

a)     Motor variable speed stirrer can be fitted with flexible shaft at an extra charge.

Fabricated out of thick wooden board or heavy gauge PCRC sheet mounted on sturdy angle iron frame. Fume Hoods are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person operating it. Outer is finished with sun mica or enamel paint and inner epoxy painted. Working tabletop is fitted with acid/alkali resistant tiles & a washbasin with connections provided inlet &outlet of water. the front door slides up &down on concealed counter balance weights. The unit is fitted with fluorescent light &gas cock for air/water supply.

Available in following sizes:

(a) 4’x2’x2’               (b) 6’x2’x2’               (c) 5’x3’x2’

(d) 7’x3’x3’               (e) 8’x3’x3’

OPTIONAL ACCESSORIES

(a)    Exhaust system complete with motor and blower assembly& installation.

(b)   PVC fume duct (per running feet).

(c) Storage compartments underneath working table top.

Suitable for laboratories, chemicals, pharmaceuticals, Dyes, Glass plants etc. Particularly useful for Heating inflammable liquids. Electric heating net is hand knitted from glass Yarn and there is no joint to maintain the strength of the yarn and stands high temperature up to 350 degree c. the body of the mantle is spun one piece from non-rusting Aluminum (up to 5.0 liters Capacity) duly stoving painted. All heating mantles are lagged with special grade mineral wool.

To work on 220/230 Volts AC.

Available in various capacities from 50ml to 200 liters.

D.C. MOTR SPECIAL SYSTEM SHAKER TO WORK ON 220 VOLT A.C. FOR VARIABLE AND SMOOTH FUNCTION SPEED CONTROL BY SPEED REGULATOR.
It is general-purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and Kahn racks etc. Upper tray covered with rubber floor and sides of the tray are slotted to take parallel and cross bars cover with rubber to hold flasks, bottles beakers, Kahn racks etc. The bars are tightened with washers and fly nuts can be adjusted as per the requirement. cycles single phase (rates are without flasks, bottles, beakers Kahn racks)

PLATEFORM SIZE

(a) 20" x 13" x 4"
(c) 20" x 13" x 4"
(d) 31" x 17" x 4"
(e) 36" x 18" x 4"

Temperature up to 300ºC Fitted with ENERGY REGULATORY to heat control / Tumbler switch.

AVAILBALE SIZE

(a) 10" X 12" X6"
(b) 10" X 16" X 6"
(c) 12" X 18" X 6"
(d) 18" X 24" X 6"

STAINLESS STEEL BODY CAPACITY 5 LITRES
The unit is capable of Atomizing upto the cap: 5 litre of Water at full evaporation in the driest possible ambient condition. Humidifier is based on rotoates disc. Complete unit F.H.P motor having 2800 RPM .(without Humidistat).

Double walled thermostatically controlled: Inner chamber made of Alluminium/stainless steel. Outer body is made of MILD STEEL. Beaded heating Elements are placed under the ribs at the bottom and sides. Temperature Controlled by Hydraulic Thermostat from 10º C above ambient to 240º C. Dial setting approximate basis. Correct reading as per L- shape thermometer fitted on the front panel at the top. Suitable to work on 220 volt A.C supply.

Complete with heating box and fume duct. The 500 watts heaters 6 inches apart having individual on/off switches and energy regulator. The height of the side stand with clamps provided, is adjustable to accommodate KJELDHAL flasks of 300 ml., 500 ml or 800 ml. Without glass parts but with fume duct.

a)     Unit of 3 test with ON/OFF switches. ( Heater Type)

b)     Unit of 3 test with ON/OFF switches. ( Mantle Type)

c)     Unit of 6 test with ON/OFF switches. ( Heater Type)

d)  Unit of 3 test with ON/OFF switches. ( Mantle Type)

Note :

1.     Sunvic Energy Regulator can be fitted at extra cost.

2.     Fume Duct made of lead or corning glass at extra cost.

Complete with mild steel tubular stand provided with one heating box, Brass condenser rack with water circulation system, brass moulded condenser clamps. Heater box is provided with top to receive the KJEDHAL flasks, with electric heating element of 500 watts each regulator, without glass parts.

a)     Unit of 3 test with ON/OFF switches. ( Heater Type)

b)     Unit of 3 test with ON/OFF switches. ( Mantle Type)

c)     Unit of 6 test with ON/OFF switches. ( Heater Type)

d)     Unit of 3 test with ON/OFF switches. ( Mantle Type)

Note : sunvic Energy Regulator can be fitted at extra cost.

Tube Length : Workable tube length 200mm. Shade System : Laurent halfshade device workable on sodium light source. Circular Scale : Graduted scale on glass divided in single degrees 0-360 every 5th line extended  and every 10th line numbered combined with sugar scale -0 to30°s and  +0 to 110°, mounted in dust proof metal housing. Vernier  Least Count : 0.05° Analyser &Polariser : Made of polaroid .Body : One piece alluminium alloy casted body. Pol Tube : Borosil glass thick wall 100mm and 200mm tube with brass holder. Light Source : 35W sodium lamp with transformar, input 220V AC. Plywood packing case, instruction manual, dust cover.

Double walled thermostatically controlled: Inner chamber made of Alluminium/stainless steel. Outer body is made of MILD STEEL. Beaded heating Elements are placed under the ribs at the bottom and sides. Temperature Controlled by Hydraulic Thermostat from 10º C above ambient to 240º C. Dial setting approximate basis. Correct reading as per L- shape thermometer fitted on the front panel at the top. Suitable to work on 220 volt A.C supply.

1) ROUND SHAPE CAST IRON TOP (Single Plate)
8" Dia fitted on Iron metal sheet body. Temperature range 240ºC Temperature controlled by Energy Regulator. To work on 220 Volts A.C. complete with 3 core wire and plug.

b) -do- but DOUBLE HOT PLATE in one row having with individual ENERGY REGULATOR. Complete with wire and plug.

Also Available in Digital Models

2) ROUND SHAPE TOP STAINLESS STEEL (Single Plate)
8" Dia fitted on Iron metal sheet body. Temperature range 240ºC Temperature controlled by Energy Regulator. To work on 220 Volts A.C. complete with 3 core wire and plug.

b) -do but DOUBLE HOT PLATE in one row having with individual ENERGY REGULATOR. Complete with wire and plug. TOP STAINLESS STEEL.

ELECTRICALLY OPERATED.(Improved Model)
Double Walled: INNER AND OUTER BODY AND BOILING
CONDENSER ALSO MADE OF STAINLESS STEEL.

(a) This method of producing and storing distilled water is designed specially to meet the needs of the MODERN Hospital and Laboratory Research. To work on 220 Volts A.C supply with 3 core wire and plug (without rubber tubing).
(b) Available cap. From 2 litre to 20 litres

Freeze drying is a technique of fundamental importance to the biological sciences in particular. In brief, Freeze drying is removal of water from a specimen after it has been frozen permitting maintenance of the specimen. Heat labile materials including proteins, antibiotic, vitamins preparations, blood plasma, hormones, tissue micro-organism etc. can now be preserved for years without any significant loss of activity.

“MB” freeze laboratory model is housed in a super structure stainless steel frame with

Complete with copper coil(Bonded outside), Perspex see through lid, gasket and control instrument i.e. Digital solid state temperature indicator LED display for measurement of temp and electronic vacuum indicator.

The unit made out of hermetically sealed compressor and with 100 liters/min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of 1x30 toot or pump head. Temperature range 40 degree c. at ambient temperature of 20 degree c.

Condenser trap: All non magnetic stainless steel fabrication, argon welded dished bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated temp is adjustable to 40 degree c. and is maintained automatically.

Vacuum drum has 12 port manifold(Main drying chamber) made of stainless steel non-magnetic grade with Perspex to cover.

OPTIONAL ACCESSORIES

Secondary drying unit

Pre-freezer attachment

Automatic voltage stabilizer 5.0 KV