This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.

Particulars	Packing
16mm & 25mm Tubes	12 Pcs.
25mm Tubes	12 Pcs.

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

Particulars	Packing
19 mm. & 25 mm. Tubes	2 Pcs.

An economical substitue for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.

Particulars	Packing
13 mm x 90 Tubes	6 Pcs.
16 mm x 60 Tubes	6 Pcs.
20 mm x 40 Tubes	6 Pcs.
25 mm x 24 Tubes	6 Pcs

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freexing temperatures.

Particulars	Packing
13mm x 31 Tubes	2 Pcs.
16mm x 31 Tubes	2 Pcs.
20mm x 20 Tubes	2 Pcs.
25mm x 12 Tubes	2 Pcs.
25mm x 18 Tubes	2 Pcs.
32mm x 12 Tubes	2 Pcs.
25mm x 36 Tubes	2 Pcs.
13mm x 18 Tubes	4 Pcs.
15mm x 18 Tubes	4 Pcs.
18mm x 12 Tubes	4 Pcs.
13mm x 62 Tubes	2 Pcs.
16mm x 62 Tubes	2 Pcs.
20mm x 40 Tubes	2 Pcs.

Polylab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent and unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed whereever required. Particulars Packing 125 ml. 12 Pcs. 250 ml. 12 Pcs. 500 ml. 6 Pcs. 1000 ml.-Sterile 6 Pcs.

These Bottles are also made of Low Density Polyethylene are are therefore translucent and unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.

Particulars	Packing
250 ml.	12 Pcs.
500 ml.	12 Pcs.
125 ml.	12 Pcs.

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are unifromly placed to facilitate the use of multichannel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

Particulars	Packing
For 96 Micro Tips of 2-200Ul	6 Pcs.
For 100 Micro Tips of 200-1000ul	6 Pcs.

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50,000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used bleow 4'C

Particulars	Packing
30 ml	12 Pcs.
50 ml	12 Pcs.

This rack, as the name suggests, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be stacked together to save shelf space. Particulars Packing Rack for 96 PCR Tubes of 0.2 ml 4 Pcs.

These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap. Particulars Packing 50 mm. 36 Pcs. 75 mm. 36 Pcs. 100 mm. 36 Pcs. 125 mm. 12 Pcs. 150 mm. 12 Pcs.

These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polythylene bags are sterilized by radiation/E.T.O.

Particulars	Packing
90 mm. Radiation Stz.	460 Pcs.
90 mm. E.T.O. Stz.	460 Pcs.
60 mm. Radiation Stz.	300 Pcs.
35 mm. Radiation Stz.	500 Pcs.

This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

Particulars	Packing
2 ml.	12 Pcs.
10 ml.	12 Pcs.
25 ml.	12 Pcs

Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cardle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Particulars	Packing
For 94 Pipettes	1 Pcs.

This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage.

Particulars	Packing
For 12 Pipettes	6 Pcs.

This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Particulars	Packing
For 28 Pipettes	1 Pc

These pots are moulded in Polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.

Particulars	Packing
100 mm.	20 Pcs.
150 mm.	20 Pcs.
200 mm.	20 Pcs.
250 mm.	20 Pcs.

These Troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.

Moulded in Polycarbonate, this autoclavable rack is made for holding twenty four 1.5 ml. micro centrifuge tubes. This rack has a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

Particulars	Packing
24 Tubes	4 Pcs.
48 Tubes	4 Pcs.

Particulars	Packing
Rack For Petri Dishes	2 Pcs.

These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.

Particulars	Packing
Rack for 90 vials of 8 ml. capacity	2 Pcs.
Rack for 50 vials of 20 ml. capacity	2 Pcs.

These narrow mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well an empty. On the other hand, the Polyethylene bottles too have excellent strenght and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Particulars	Packing
60 ml.	12 Pcs.
125 ml.	12 Pcs.
250 ml.	12 Pcs.
500 ml.	12 Pcs.
1000 ml.	6 Pcs.

These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

Particulars Packing 225x150 mm-Side Hole 1 Pc. 300x200 mm-Center Hole 1 Pc. 300x200 mm-Side Hole 1 Pc.

These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulationa and Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can acept mild bases, weak acids but not organic solvents.

Particulars	Packing
12 x 75 mm/PS	500 Pcs.
12 x 75 mm/PP	500 Pcs.
Cap for 12 mm RIA Tube	100 Pcs.

Sample Containers are made of Polypropylene. These thin walled, disposable containers are easily screw capped with less than 1/4" of a rotation. As one screw caps the container, the top of it sets in a domed ring in the cap making it completely leakproof. This is perhaps the ideal most option available for carrying samples from one place to another safe & sound.

Particulars	Packing
100 ml	100 Pcs.

These Funnel is made of Polypropylene, giving excellent contact clarity and strength. The pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel.

Particulars	Packing
100 ml.	2 Pcs.
250 ml.	2 Pcs.
500 ml.	2 Pcs.

This non-corrosive Seperatory Funnel Holder, moulded in Polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of seperating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Particulars	Packing
Seperatory Funnel Holder	12 Pcs.

These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the slide box has a numbered index for easy slide identification. Particulars Packing 25 Slides 12 Pcs. 50 Slides 12 Pcs. 100 Slides 6 Pcs.

Slide Mailer present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in two sizes i.e. 2 slides & 5 slides.

Particulars	Packing
2 Slides	25 Pcs.
5 Slides	25 Pcs.

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

Particulars	Packing
150 ml	12 Pcs.
200 ml	12 Pcs.

These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6mm to 10mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options i.e. 2 way & 3 way.

Particulars	Packing
Stop Cock 2 Way	6 Pcs.
Stop Cock 3 Way	6 Pcs.

As the name suggests, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190^o. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudonal grooves which give it a non-twisting character when plaed in a vial rack.

Particulars	Packing
1.0 ml	500 Pcs.
2.0 ml	500 Pcs.
5.0 ml	500 Pcs.

These polypropylene vials add to the existing range of Polylab storage vials. Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc.

Particulars	Packing
SV-10 ml	500 Pcs.
SV-5 ml	500 Pcs.