This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold indentification labels. The built in seal ring would set in the tube making the combination a leakproof one.

Particulars	Packing
Cap for Test Tube o 25 mm	100 Pcs.

Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Particulars	Packing
140 x 120 x 110 mm	6 Pcs.
160 x 160 x 160 mm	6 Pcs.
400 x 400 x 100 mm	6 Pcs.

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable durable and dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be totally disengaged before autoclaving.

Particulars	Packing
5Ltr.	1 Pc.
10Ltr.	1 Pc.
20Ltr.	1 Pc.

These sets consist of moulded balls of different sizes. These sets are very helpful in modelling different organic & inorganic compounds.

SENIOR SET: This set consists of 150 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.

JUNIOR SET: This set consists of 30 connecting lugs & 75 balls of different colours & sizes.

Particulars Packing Senior Set 1 Pc Junior Set 1 Pc

Polylab Beakers, moulded in Polypropylene, have excellenct clarity and very good chemical resistance. The autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.

Particulars	Packing
50 ml.	12 Pcs.
100 ml.	12 Pcs.
250 ml.	12 Pcs.
500 ml.	12 Pcs.
1000 ml.	6 Pcs.
2000 ml.	6 Pcs.

Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has a perforated filter plate.

Particulars	Packing
70 mm.	12 Pcs.
110 mm.	6 Pcs.

This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofloric Acid and Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.

Particulars	Packing
25 ml.	10 Pcs.
50 ml.	10 Pcs.

This Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surfaces. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15ml. tubes respectively. These tubes are available sterilized as well as non-sterilized

Particulars	Packing
15 ml.	100 Pcs.
50 ml.	100 Pcs.
15 ml.-Sterile	100 Pcs.
15 ml.-Sterile	100 Pcs.

Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength.

Particulars	Packing
16 ml. Cent. Tube PP.	50 Pcs.
50 ml. Cent. Tube PP.	50 Pcs.
16 ml. Cent. Tube PC.	25 Pcs.
50 ml. Cent. Tube PP.	25 Pcs.
Cap for 16 ml. Cent. Tube	100 Pcs.
Cap for 50 ml. Cent. Tube	100 Pcs.

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving. Particulars Packing 100 ml. 12 Pcs. 250 ml. 12 Pcs. 500 ml. 12 Pcs.

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The Measures are clear have good chemical resistance and have raised graduations for easy reading.

Particulars	Packing
12 ml.	12 Pcs.
25 ml.	12 Pcs.
50 ml.	12 Pcs.
125 ml.	12 Pcs.
200 ml.	12 Pcs.

Moulded in Polyethylene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edges prevent leakage & slippage Particulars Packing T-Connector 36 Pcs. Y-Connector 36 Pcs.

Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190^oC to 121^oC. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.

Particulars	Packing
81 Places for 1 ml. or 1.8ml. Cryo Vials	4 Pcs.
81 Places for 4.5 ml. Cryo Vials	4 Pcs.
100 Places for 1 ml. or 1.8ml. Cryo Vials	4 Pcs

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
Particulars Packing Cryo Coders 100 Pcs.

 

Cyro Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vial can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

Particulars	Packing
Cryo Rack	2 Pcs.

Cyro vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190^oC. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonalgrooves in the base give a non-twisting feature to these vials when placed in a cryo rack.

Particulars	Packing
1.0 ml	1000 Pcs.
1.8 ml	1000 Pcs.
4.5 ml	500 Pcs.

These Crystal Model Sets contain different coloured jacks(Red, Black & White) & connectors(long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

Particulars	Packing
Diamond	1 Pc
Sodium Chloride	1 Pc
Graphite	1 Pc

Polylab Desiccators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing. Each Desiccator is provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the disc provede air troughs and support to the dishes. However porcelain discs are advisable in case of incandescent crucibles. Size Packing 150 1 Pc. 200 1 Pc. 250 1 Pc.

Plain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight Size Packing 150 1 Pc. 200 1 Pc. 250 1 Pc.

Blown in Low Density Polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly.

Particulars	Packing
60 ml.	12 Pcs.
125 ml.	12 Pcs

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two trpered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8". Particulars Packing Fisher Clamp - Single 12 Pcs. Fisher Clamp - Double 6 Pcs.

Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point to contact. This Flask Stand can hold round bottom flask at every point of contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved.

Particulars	Packing
Flask Stand	6 Pcs.

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths, Easy to load, these are essential in microbiology and immunology labs. The surface of the rack has raised alpha-numberic index for easy identification and has a central rod handle for convenient lifting.

Particulars	Packing
16 MCTs of 15ml.	12 Pcs.

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

Particulars	Packing
Funnel Holder	12 Pcs.

These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.

Particulars	Packing
50 mm.	72 Pcs.
62 mm.	36 Pcs.
75 mm.	36 Pcs.
100 mm.	36 Pcs.
150 mm.	12 Pcs.

ELISA/ASSAY plates are made of optically clear, non-toxic Polystrene. These plates with 96U bottom or flat bottom wells bear alpha numeric index. Uniform placement of all the well facilitate use of multichannel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.

Particulars	Packing
Flat Bottom Elisa Plate	72 Pcs.
U Bottom Elisa Plate	72 Pcs.
Flat Bottom Assay Plate	72 Pcs.
U Bottom Assay Plate	72 Pcs.
Flat Bottom Elisa Plate-Sterile	72 Pcs.
U Bottom Elisa Plate-Sterile	72 Pcs.
Flat Bottom Assay Plate-Sterile	72 Pcs.
U Bottom Assay Plate-Sterile	72 Pcs.

This apparatus is made of polyethylene has three main portions. The top portions is fitted witha thistle funnel and a bulb structure through which dilute acid can be poured wich reacts with a metal sulphide in the base of the Apparatus. HS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.

Particulars	Packing
250 mm.	1 Pc.
500 mm.	1 Pc.
1000 mm.	1 Pc.

This tray is moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware and other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.

Particulars	Packing
375 x 300 x 75 mm.	10 Pcs.
450 x 350 x 75 mm.	10 Pcs.

MCT boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCTs of 1.5ml & the other can hold 100 MCT's of 0.5ml. These boxes are designed to work at temperatures ranging from -190oC to +121oC. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.

Particulars	Packing
Rack for 100 MCTs of 0.5 ml	4 Pcs.
Rack for 64 MCTs of 1.5 ml	4 Pcs.

This rack is for both 0.5ml & 1.5ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5ml. MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.

Particulars	Packing
Rack for 0.5 ml. & 1.5 ml. MCTs	4 Pcs.

Measuring Cylinders, moulded in Polypropylene, are single piece cylinder. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.

Particulars	Packing
10 ml.	24 Pcs.
25 ml.	12 Pcs.
50 ml.	12 Pcs.
100 ml.	12 Pcs.
250 ml.	6 Pcs.
500 ml.	4 Pcs.
1000 ml.	3 Pcs.
2000 ml.	2 Pcs.

These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.

Particulars	Packing
250 ml	12 Pcs.
500 ml	12 Pcs.
1000 ml	6 Pcs.
2000 ml	6 Pcs.